Are Topical Steroids Safe While Breastfeeding?

blades for blade manufacturing machine (prototype and Esteve Fernandez Miquel) Manufacturing

Girona Miquel Fernandez and Mr. Esteve de Banyoles, contributing their bit with the design of this prototype machine to make the blades of the gyros.

Basically this is to modify a bit flat (the old) to be used by carpenters to make the holes in the wood that also worked as a fresadora.se side has the desired profile (it's a Clark-Y) based on wheel by hand and then is given the edge to cut the madera.En one end is supported by a bearing and at the other end is grasped with the holder drill bits that has been previously installed on a support line and level. It calculates the distance of maximum thickness of the profile to the table that was previously carried out a rail guide rope equal to the motor perfil.com used a power drill and 3000rpm 550w. The prototype is working properly and makes a shovel in 3 minutes starting from a ribbon raft made of pine + width equal to the string of high profile equal to the maximum thickness that we have previously glued. It works the queue once it dries, then balance, sanded and give a light coat of color and / or varnish. Optionally can be coated with monocot or similar.

prototype
Well, Mike and his colleagues have designed this machine.

with a robot that looks to the naked eye, and with a mechanism that allows a perfect setting for a short time using shovels.