Friday, December 14, 2007

Do I Get A W-2 From Disabilty

DUCK MEAT FOR ESTABLISHING BUILDING




In many countries, the chickens are poultry par excellence. However, duck rearing is considered an activity with prospects. The advantages become obvious when one recognizes in these birds the ability to live in adverse environmental conditions, resist diseases and pests and produce excellent meat.
The intensive rearing of certain types of ducks increased in various regions of the world. For centuries Europeans and Asians know that the duck is one of the pets more useful and versatile.

Technicalities

meat production for the choice of a good race is a staple. Peking Duck stands out among the most desirable. Its resistance to different areas and has the ability to reach some of their larger size (3,200 kilos at 77 days of slaughter time) place it among the top in the typical geography of raising poultry. A common mistake that is committed to raise ducks is like chickens, when, unlike them, they prefer to spend most of the time outdoors. In temperate climates are raised without artificial shelter. Most breeders have a defense corral where they lock animals at night, or continuously if space is limited.
In areas where the temperature is low (less than 15 º C) is necessary to build or refurbish a facility. In modern facilities for ducks is recommended Bolts housing system. Are low buildings (2 meters) long and semi-flat roof (rural veneer, aluminum or tar paper). The interior (12 m wide) consists of a central corridor (1.5 meter) that from the standpoint of labor, provides food, places ation of straw floors and extraction manure. If the soil, preferably of land, has poor drainage, the pen must be covered with sand, straw or wood shavings, ends at a level higher than the center (hall).
Through hatches located on the side walls birds come to the parks (12 meters with a slight tilt). the slatted flooring is a solution to prevent accumulation of feces and food waste. Counter to what is generally believed, the Ducks can be raised well without a swimming pool. On the contrary, often the existence of stagnant pools of water leads to health problems. However, you need a constant supply of clean water for drinking and washing the peak. It is imperative to design drinking at least four inches deep, for prevent puddles of mud should be placed on platforms built with wire.
However, a minimum stock composed of one male and 4 female (a breeding industry characteristics would have to start with no less than 700 animals). For each duck player located 0.5 meters in area, to which we must add 1.5 meters of park and troughs.


Nidal and brooding
you need an open nesting females or nests for three trap (35 cm wide and 50 inches long and 40 inches in height for each bird). A fantastic time (in the wild) begins in September and extends until mid-December. In captivity putting
starts around week 23 and start the normal cycle is 40 weeks with a yield of between 160 and 200 eggs, depending on the strains. The egg weighs about seventy grams and incubation lasts twenty eight days.
As females lacking maternal skills, pay special attention quickly lead to the newly laid egg incubators. Not all are suitable fertile eggs for incubation. The ideal is to select medium-sized and free of defects in the shell (cracks, stains or defects). Caring for the eggs before placement the device is as important as the correct procedures of incubation.
Many owners of small poultry flocks neglected this issue without realizing that it is the main cause of poor emergence. The egg washing some lesions may also occur in the embryo. Although it is preferable to put dirty washing because of filtering germs or bacteria in the incubation process can mean the failure of the entire production. The stored away from direct sunlight, should be in basements or rooms cool and wet (refrigerators are usually very cold). The development of the incubator (soft air) should be between 48 and 72 hours before placing the eggs. However, when being placed in it is necessary to heat the eggs for 5 or 6 hours at an ambient temperature of 21 º C.
If this procedure is not carried out the water condensed in the shells and it is possible to break the yolks. Many farmers tend to adjust the machine with the eggs inside. This practice is a serious mistake since one of the most critical periods for development of the embryo are the first 4 or 5 days of incubation.
For greater percentage of hatchings is essential that the eggs are incubated in l a right position, always on their side with the large end (air chamber) slightly high. It should accommodate a number of eggs according to the capacity of the tray and stack them in any way or over.
Care humidity inside the incubator is key to building a strong number of ducklings. The speed at which content is dehydrated eggs is regulated by the amount of moisture in the enclosure air incubator.
This usually is provided by the evaporation of water from the containers. The ideal is to reach a relative humidity of 55% and at hatching (last 3 days of incubation) should increase to 75%. Eggs should be turned to exercise the embryo and reduce stress. Some will hatch if they are turned once every 24 hours. but it is advisable to rotate 3 times daily at intervals of 8 hours., so you will get a high percentage of births (50 to 60%). But for best results, you must spray the eggs with warm water once a day (except for the first week and three days late incubation). If the ambient temperature is 20 to 21 º C, egg trays should be removed from the incubator and cool 5 minutes a day during the second week, 8 'third and 12' the first 4 days of the fourth week.
After 28 days the ducklings are born. These come immediately to the feed and begin to eat food in large quantity. Not have higher demands climate. They must provide adequate heating for three weeks, during which the temperature of 30 º C should fall to 24 ° C.
space requirements are 1 square meter per 20 birds in the first two weeks. This figure is then incrementa.Los ducklings are the equivalent of broiler chicken. Over time it has managed these birds so as to achieve further growth in the shortest time and with the least amount of food. Reach
weighing 2.2 to 2.5 kg at 7 weeks with a feed conversion of 1 kg of meat every 3.5 or 4 kg of food. To encourage the development of fat ducks should exercise limited, with a continuous supply of high energy.
The rapid growth of the birds is linked directly to the amount (240 g / day) and quality of food provided to them. Good performance is obtained with a diet containing 20 to 22% protein until 2 weeks old and 16 to 18% from the second to the seventh week. Type alimentaciónSegún
British specialists John Walters and Michael Parker, the ducks that breed butcher purposes need a good start, which is achieved using the feed. The food in the form of crumbs or granules, owning a 10% protein, especially for ducks are the most recommended. This meal should be available the animal for 24 hours in the first four weeks of life.
If you can keep food in this manner until the time of dressing, but not justified. Therefore, after the fourth week should be renewed for another food more balanced economy, which usually contains fewer proteínas.Una reasonable fattening diet may consist of a "soup kitchen scraps" made of bran, ground oats, barley flour and a little cornmeal. A mixture of stale bread soaked with remnants of boiled fish is an excellent diet, but growth will be slower.

See Online Best Futanari Manga

INCUBATOR INCUBATOR FOR LA


Making an incubator homemade poultry
fans world of birds are a challenge having an incubator to personally bring their pets, and that economically there is little affordable. Therefore, one alternative is to get down to work and create a homemade incubator to see how the chicks hatch. With the help of wooden boards, wiring, thermostat, incandescent lamps, a metal tray with slots to deposit eggs and one for the water, get to make your own incubator at a reasonable price.
A point to be clarified is the type of air that must be installed, and that changes sudden temperature affect the embryo. There are two types of air: the force, produced by fans, has the peculiarity that maintains constant air without causing any disturbance, another possibility is tight, which differs from the previous one that this time the air is emitted naturally , creating currents barely noticeable, and not remain in the same state.


cuerpoEl Wood for the first step is the construction of the base of the incubator, which will give way to housing. The process will be done by attaching wooden boards, since this material retains and maintains the correct temperature. It should plates are composed of several sheets pressed to a thickness ranging between 14 and 18 mm to resist moisture.


The sides of the incubator should be formed by the joining of two horizontal strips which are measures 2.5 x 2.5 cm. Once we have done this part, shall be chosen from the top steps and floor, taking into account that the first one should extend one inch from the sides. When you have made the floor, it will join with the sides glued and nailed to the bottom list, and later through the same process with the lid.


The door of the incubator must be set, so it is cut in half of a rectangle where it will stick on the inside a transparent glass. Depending on the movement we want to open the door to be hinged at the bottom or on one side. Then you have to glue and nail the rest of the parts already assembled.

temperaturaUna
Adjusting the basic pieces to equip the unit of electrical system is the digital thermostat, which is the same as that used for heating, but it is essential to choose a high accuracy. He will be responsible for preventing water flow inside the engine, as well as renewing the air by regulating the temperature, which must range between 36-39 º C. It is imperative that this tool has a goatee and a suitable sensor for variations on and off the system are changed as little as possible. The sensor is placed on one side by inserting it into a hole to be done manually.


The interior is heated, either with ordinary incandescent lamps, or with a special infrared lamp 250W birds. We must take into account the possible release of toxic gases: they occur when introducing materials such as plastic or paint, should therefore be avoided as it greatly harm the health of embryos, even to suffocation.


designed the interior wooden box must include two essential elements: a tray of eggs and a place where you can pour water. Both should be composed preferably stainless steel and have appropriate measures in conformity with the box.


tray to deposit the eggs must be hatched, can take advantage of this time a mosquito mesh or perforated metal plate, considering that each square should measure no more than 1 cm ². The reason why this tool must be gaps is because in this way will better air circulation. The contraption responsible for maintaining the water can be perfectly tailored to an oven tray that is three inches high on the walls. The easiest way to turn the eggs is by hand, but before washing hands to avoid complications such as oozing from the pores of the skin. With these simple guidelines will enjoy the pleasure of your own incubator at home.

Wednesday, December 12, 2007

Severe Pain And Spotting For Days

avez

Incubator
When undertakes a construction project of any product, one of the first steps to be taken is the drafting of the initial specifications, ie, the minimum requirements you must meet the device to meet our needs.
for drafting the initial specifications is necessary to know the problem, and to the extent possible, to know what are the solutions that have traditionally been given. To make this initial investigation, all available means are valid, such as studying other similar devices, ask other experts in the matter, or search for documentation (eg brochures, internet, magazines, books, etc ...).
This is an example of the design project an incubator for chicken eggs, made with readily available materials.
The purpose is to identify the parameters to be controlled, and they make initial specifications.
As an introduction should be borne in mind that control processes are related to:
Keep the temperature stable.
Maintain relative humidity between certain values. Ventilate
a regulated manner. Move
eggs.